The Roll-A-Door® Series 3 is perfect for tight headroom situations, or where maximum opening height is required. Each door is custom made to suit individual openings.

Industrial Roller Doors


  • Continuous brake pressed steel curtain
  • Manufactured from 0.5mm gauge steel, flexible curtain, pressed to a Squareline ribbed profile, sliding between vertical guides
  • Matches with the B&D Squareline deluxe domestic Roll-A-Door
  • Tapered curtains
  • Aluminium bottom rail with weatherstrip
  • Lower noise and maintenance
  • Sizes range from a minimum of 1200mm high x 2000mm wide to a maximum of 3000mm high and 5500mm wide or 3600mm x 4200mm wide


  • Prevents penetration of moisture and dust, thereby minimising the chances of corrosion
  • Strong, while providing an attractive appearance
  • Exact solution for openings on sloping floors
  • Added protection against dirt, leaves and weather
  • Provides a profile match for situations where small and large openings are next to each other

Operational Ease Nylofelt® is used to minimise friction at the working surface. This ensures that continuous smooth, quiet operation is an ongoing benefit of this product, requiring minimal effort and without so much as a touch of lubricant. The Direct Drive gearing assembly provides low operating effort. Secure Locking

  • Locks are located at waist height internally at the left hand side as standard (inside looking out)
  • No bending required to unlock doors
  • Ensured security

Easy Opening The gearing assembly is mounted inside the door roll to minimise side clearance requirements and with its no maintenance, low friction characteristics, provides low operating effort to open and close very large doors. Features include:

  • Doors up to 2400mm high can be operated by hand without the need of chain wheel equipment
  • Doors between 2400mm and 3050mm use efficient direct chain drive
  • Doors over 3050mm high use efficient, compact, chain equipment gearing
  • Quiet and durable nylon gearing
  • Ease of single handed operation
  • Gearing components require no lubrication due to materials used in manufacturing
  • Balanced loading and withstands very high overload forces without ill effects

Colours B&D Series 3 Squareline Industrial Roll-A-Doors are available inan extensive range of standard B&D colours including special Zincalume® coated finishes designed to gain greater impact and identification for the Self Storage complex, or to suit your corporate identity. As an option, Zincalume® coated finish can be polyurethaned on site for even wider colour selection. View the B&D Colour Chart by clicking here Maintenance No greasing of the door guides is required, and the axle, hubs and all other working components have either been manufactured with self-lubricating materials or greased at the factory. To reduce operational and replacement costs, curtains are easily repaired. The Series 3 Squareline™ Industrial Roll-A-Door® is virtually maintenance free. Options

  • Centre lift lock with external key and internal knob operation, or deadlock are also available
  • Chain locking and waist high internal side bolt locking
  • Bottom rail four point slide locking
  • Electric and remote operation are available, ask your B&D representative or dealer to recommend a unit to suit

Note: The door should be painted as soon as possible after installation. Installation Requirements B&D Roll-A-Door® is normally installed behind the opening on brackets above and to each side of the lintel. Headroom and sideroom are needed to accommodate overlap, brackets, rolled up curtain, guides and chain gear. The structure to which the brackets and guides are to be mounted must be of sufficient strength to accommodate the fixings and loads imposed by the door through operation and other forces. View the B&D Colour Chart by clicking here